Sccy Cpx-2 Cbsb 9mm Polymer Frame Pistol Blued Steel Slide Review

SCCY CPX-2 Gun Review

The largest growth segment in the already hot firearms market is in concealed carry handguns and sub-compacts. A behave pistol is frequently the number i purchase for new gun owners: a handgun that can be used for home defense as well every bit concealed behave. And while buying a good gun is foremost in their minds, plenty of buyers with price constraints are happy to become with a relatively lesser-known brand if the price is right. That'due south exactly the market segment the SCCY CPX-2 9mm handgun has staked out.

SCCY (originally Skyy, not to be confused with the vodka) has but been producing firearms in the state of Florida since 2003. But they tin can be found at stores nationwide and just nearly every gun show these days. Their raison d'etre is producing handguns that are big on quality at a low price, and they seem to have hit that mark with their flagship pistol, the CPX-2 9mm.

Aye, this handgun can be had for as little equally $229 via Brownells. MSRP runs around $319.

Features

For that $250 you get a polymer frame semi-machine handgun with a 3.1 inch barrel in 9mm that sports a "double action only" trigger with a full-length bar stock chassis embedded under the skin. It accepts double stack 10-round magazines with either affluent-fit bases or finger extensions that give yous a piffling more pinky room. And the CPX-2 comes with two mags as well equally replacement bases for both.

The original CPX model (CPX-1 for those keeping score at dwelling) included a manual safety on the frame, but it drew so much criticism that SCCY dropped it altogether in the newer model.

When you pick upward a $250 gun, yous expect information technology to feel cheap. But with the SCCY pistol, information technology feels the aforementioned as any GLOCK — merely slimmer. None of the usual rattling or toy-like textures are nowadays, only a polished and shiny gun. It fifty-fifty looks nice on the outside. Dainty, compared to other polymer framed handguns, at to the lowest degree.

It's quite appealing on the inside too. The gun takes down easily, kinda similar some unholy combination of a 1911 and an FNS-9. Tools are unfortunately required to lift the takedown pin out of its hole, but it goes back together with fingers only.

The white dots on both the front end and rear sight are especially nice and big, highly visible white dots that can be seen even in low lite. That's not to say that you'll actually be accurate, however.

Trigger

The trigger is where the send starts to fall apart. Information technology's a double activeness internal hammer chore, then we already know the long trigger pull is going to be heavier than Joe Grine coming out of an all-yous-can-swallow Chinese cafe. And while it'southward a smoothen pull, there's something nearly the combination of the flat-yet-curved trigger and the modest grade factor of the gun that kept me from actually putting rounds on target. At 10 yards I was "minute of newspaper" at all-time. Follow-up shots were a challenge, so con't expect one-inch groups.

Ammo Feeding

While the gun will consume anything y'all throw at information technology, the magazines seem to object to steel-cased rounds. They caused this malfunction back at the loading table, and caused the stainless steel slide to lock back one time on the firing line before the gun was empty. Then again, you lot get what you pay for when information technology comes to ammo.

Overview

Personally, I wasn't a big fan of the gun. I wasn't able to be accurate with information technology, and the DAO trigger left something to be desired. Then once more, I'k not this pistol'south target audience.

Thankfully I had brought a couple brand-new shooters with me the day I was testing it, and out of all the handguns we fired, this was the ane they seemed most interested in buying. They had been thinking almost getting a handgun for home defence, and even with the FNS-9 and Glock 17 sitting on the table, they kept asking near the SCCY CPX-2 and wanting to fire it.

There is something to be said about a good looking, cheap gun.

Specifications: SCCY CPX-ii

Calibers: 9mm
Action: Semi auto
Butt length: 3.1 inches
Overall Length: 5.7 inches
Overall Width: 1 inches
Overall height: 4 inches
Weight: xv oz.
Sights: steel 3-dot sights
Finish: Blackness or stainless
Capacity: 10 Rounds
MSRP: $ 319 — as depression every bit well-nigh $229 via Brownells

Ratings (Out of Five Stars):

Accuracy: * *
At contact altitude, where this gun is about probable to be needed, it doesn't really matter. But "minute of bad guy" at 10 yards is the best I could muster.

Ergonomics: * * *
For me and my big hands, the handgun is also pocket-sized. Even with the finger grooves and extended baseplates on the magazines, I couldn't get a solid grip. Add the long and stiff double-action trigger pull and you lot have something that I would buy, fire in one case, and then chuck in the drawer, never to be seen again…until information technology'south needed.

Reliability: * * * *
I had no issues, except when I ran steel-cased ammo. The owner of this handgun tells me he has run everything from FMJ to hollowpoint ammo to +P loads with no bug, and I'm happy taking him at his word on that. Or, rather, my hand appreciates him testing the gun for me.

Customization: *
At that place are pretty much no aftermarket options for these handguns.

Overall: * * * *
While this isn't my showtime choice for a dwelling defense or curtained bear pistol, I can definitely encounter why SCCY sells so many. It'south inexpensive and reliable enough to meet the needs of a new shooter looking for a budget self defense firearm.

mendezdebectiand75.blogspot.com

Source: https://www.thetruthaboutguns.com/gun-review-sccy-cpx-2/

Share this post